Electronic Control Concepts

	Universal Programmable Control Model 82C
Overview The Model 82C is a programmable timer, used for a wide variety of sequence timing and control applications. The Model 82C provides two precisely controlled relay contact closures that can be programmed for many control and automation applications. Programming is done at ECC to meet customer requirements. The Model 82C Controller is designed for use by customers wanting one special controller, or customers needing production quantities of controllers including custom labeling. The 82C Circut Board Assembly is also available.
Features Control/Timing flexibility Custom product development Proven reliable industrial design Simple installation Precise digital timing based on line frequency or time Customer definable operator input Consistently accurate timing and control Two year warranty Attractive contemporary styling Made in U.S.A.
Specification
TIMING RESOLUTION 2 microSec minimum Maximum depends on application TIME SELECT METHOD 16 Position Switch Other configurations possible TYPICAL TIMING FUNCTIONS On-delay Timing Off-delay Timing Control based on input conditions Counting applications Logic (e.g. A greater than B, A=B) Others OUTPUT CONTROL RELAYS 1 form 'C' [SPDT] 1 form 'A' [SPST] Contacts rated 10A/ 115-230 VAC ACCURACY Application dependant PANEL CONTROLS /INDICATORS Timer Power On/Off - Green LED Relay 1 - On Light - Amber LED Relay 2 - On Light - Red LED	EXTERNAL INPUTS Many possible including (but not limited to): Hand-Switch on 6 ft, retractile cord Temperature Sensor Humidity Sensor Pressure Sensor Contact Closure Current Sensor Voltage Sensor ENCLOSURE Aluminum, black finish with custom printed overlay on front cover Size 7" wide x 5.5" high x 1.6" deep Cover easily removed for installation. MOUNTING Three holes in back panel for wall mounting POWER 115 VAC, 60 Hz [ U.S. standard] 230 VAC, 50/60 Hz [ optional] POWER CORD Eight foot 18 gauge with 3- wire grounded plug CONNECTIONS Screw -type terminal strip INSTALLATION & OPERATION MANUAL Furnished with each control
Model 82C is a Microcomputer based digital timer / controller. The 82C design was originally based on Electronic Control Concepts line of x-ray timers which are manufactured to strict federal standards. The programmable microcomputer allows ECC to configure the Controller for many different applications. Our staff can assist you in defining and specifying your requirements. Please contact us about your particular control requirements. We will work with you as a partner to achieve the desired results.
For more information, or to place an order, please contact: Electronic Control Concepts 160 Partition Street Saugerties, NY 12477 1-800-VIP-XRAY or 914-247-9028 Fax eccxray@ulster.net HOME MODEL 8200A \| MODEL 8700 \| MODEL 82C DESIGN SERVICES \| X-RAY LIST