X-RAY PULSE COUNTER
MODEL 8700
DESCRIPTION
The Model 8700 x-ray pulse Counter/ Exposure Time Meter is used to measure the time or duration of radiation output produced by a wide variety of x-ray generators. The x-ray sensor in the 8700 allows direct measurment of exposure from the x-ray head. Pulses produced by half wave and full- wave x-rays are measured as 60 or 120 pulses per second. For DC, capacitor discharge and 3-phase x-rays, the 8700 measures the exposure time in milliseconds.
When testing x-ray timers and controls, the time of relay contact can be measured using the AC input feature.
The Moodel 8700 is "self-resetting". There is no need to reset the instrument after each reading. The reading is stored after each exposure, holding until the next exposure.
FEATURES
- Small Hand Held Size
- AC or DC x-rays
- High Accuracy
- Self Resetting
- Battery Operated
- Two Year Warranty
- Direct Exposure Reading or AC Input
- Use for Medical or Dental X-rays
- Remote Sensor Option
- Custom Carrying Case Option
- Durable ABS Plastic Case
TYPICAL
APPLICATIONS
- Measurement of Exposure
- Quality Assurance
- Verification of X-ray Exposure Time
- Calibration of X-ray Timer
- Direct Measurement of Timer Accuracy
- Troubleshooting and Repair of X-rays
SPECIFICATIONS
- ACCURACY
- AC- one count
- DC- 2% +/-1 millisecond
- SENSITIVIY
- X-ray input
- 50kVp, 5mA at 5 cm from top surface of case, pointed to target
- AC Input
- 65 VAC minimum
- X-ray input
- RANGE
- 9999 Pulses
- 9999 Milliseconds
- DISPLAY
- 0.4" Liquid Crystal
- POWER
- Internal 9 Volt Battery
- Low Battery Indicator
- BATTERY LIFE
- 24 hours continuous
- Typically 6 months of normal use
- CONTROLS/ INDICATORS
- Three position switch
- Pulse
- Off
- Milliseconds
- 4 digit liquid crystal display
- 0.4" character
- Low battery indicator
- power-on LED {green}
- Oscilloscope output
- Remote Sensor Input
- Three position switch
- PHYSICAL SIZE
- 80 x147x 40mm
- 3.15 x 5.8 x1.6 inches
- CONNECTIONS
- None required for direct exposure measurement
- 2 tip jacks for AC input
- Jack for Remote Sensor Option
- Jack for Oscilloscope Output
- OPTIONAL ACCESSORIES
- Remote sensor with 3 meter cable
- Padded Cordura Carrrying Case
- Oscilloscope Interface Cable
- Long Life Battery
For more information, or to place an order, please contact:
Electronic
Control Concepts
160 Partition Street
Saugerties, NY 12477
1-800-VIP-XRAY or 914-247-9028 Fax
eccxray@ulster.net
Electronic Control
Concepts markets the Model 8700 Pulse Counter to regulatory agencies and
x-ray professionals serving the dental and podiatry industries. To purchase X-ray Pulse
Counters for other purposes including the medical diagnostic industry please contact Nuclear Associates. Ask for Nuclear Associates
Model 07-453 X-ray Pulse Counter.
MODEL 8200A | MODEL 8700 | MODEL 82C
DESIGN SERVICES | X-RAY LIST