Universal X-ray Timer

	Universal X-ray Timer Model 8200A
Description The Model 8200A Universal X-ray Timer is a new microcomputer based digital timer/controller. The Model 8200A replaces the industry standard Model 1400A and 8200 timers that were also made by Electronic Control Concepts. The new timer will improve the performance of older x-rays, and the precise digital electronic timing will meet the most stringent state or federal regulations. The Model 8200A X-ray Timer is certified to conform to DHHS Federal Performance Standard 21CFR, subchapter J. It can be used on certified or non-certified x-rays. The model 8200A design is based on a programable microcomputer. This allows ECC to customize timers and controls for special applications.
Features Precise Timing Improve Older X-rays to Modern Timing Standards Certified to DHHS Performance Stds. Easy Installation Two Year Warranty Microcomputer Based Electronics Made in USA	Applications Replacement of mechanical timers Replacement of faulty timers Standardization of x-ray operation with different x-rays within office Allows control of exposure with fast film Brings older x-rays into compliance with modern timing requirements
Specifications
TIME SELECT METHOD 16 Position Switch ACCURACY +/-1 Pulse (16.7 ms at 60 Hz line) TIMING RANGE 0.05 seconds to 2.0 seconds in 16 steps INPUT POWER Operates from AC line 115 VAC, 60 Hz (standard) 230 VAC, 50 Hz (optional) CONTROLS/INDICATORS ON/OFF Switch Power-on LED (green) Exposure Time Control Switch 16 Position Switch Exposure Push-button Switch Standard - Mounted on front panel Optional - at end of 6 foot coiled cord Filament Relay Active LED (yellow) Exposure Relay Active LED (red) Audible Tone indicates end of cycle	OUTPUT CONTROL RELAYS Filament preheat, Form C (SPDT) Exposure Control, Form A (SPST) Contacts rated 10A, 115 VAC PREHEAT DELAY Energizes filament winding to allow x-ray warm-up Selectable at installation 4 to 32 pulses (.067 sec to .53 sec) TIMER RESET Automatic at end of selected exposure time, or on release of exposure switch May be cycled immediately without loss of precision PHYSICAL SIZE 178 X 140 X 41 mm 7.0 X 5.5 X 1.6 inches CONNECTIONS Line cord to AC outlet User installed wires to x-ray

Optional Accessories Hand Switch on 6 foot Coiled Cord Warranty Two years from date of shipment on any failure not caused by mishandling or misuse.	Ordering Information Model 8200A-PB : Universal X-ray Timer with push-button exposure switch mounted on front panel Model 8200A-CC : Universal X-ray Timer with push-button exposure switch mounted on coiled cord
8200A-PB	8200A-CC
For more information, or to place an order, please contact: Electronic Control Concepts 160 Partition Street Saugerties, NY 12477 1-800-VIP-XRAY or 914-247-9028 Fax eccxray@ulster.net HOME MODEL 8200A \| MODEL 8700 \| MODEL 82C DESIGN SERVICES \| X-RAY LIST